Video at the bottom of the page!

ETS is back at it again with another highly anticipated product for the Ford Focus RS. This time, their catback exhaust. 

• Made in the USA
• Direct Bolt On Replacement
• Tig Welded
• Fully Mandrel Bent In House
• 100% 304 Stainless Steel Construction
• 4.5" Brushed Exhaust Tips
• Extreme (No Mufflers w/ Resonator) or Standard (Twin-Mufflers w/ Resonator)
• Connects To Factory Downpipe or ETS 3.0" Downpipe
• INCLUDES DRONE TUBE AS PICTURED!
• No Check Engine Lights

Options: 

Exhaust Valve Bypass - This is to trick the ECU/BCM into thinking the exhaust valve is still present and allow you to switch modes.

Resonator - This is an optional additional to put the resonator shown in the midpipe. If you Choose no you will have a straight midpipe. The Resonator tones the exhaust note at cruise a hair and removes some of the "rumble" in the exhaust during low rpm decel. This DOES NOT remove the factory "POPS AND BURBLES" from the exhaust, those are controlled by the ECU. 

The exhaust does delete the factory exhaust valve, however we offer a  bypass unit that will allow you to keep all drive modes. If you are looking to keep your exhaust valve we will be doing an "add-on" kit that will fit any catback with a 3" straight section on the tip, at a later date. Most people prefer to have the valve removed as they start to squeak after some time, get stuck closed or open, and sometimes can get stuck shut completely cold conditions causing a drive mode error.